Comark RF500A Manual do Utilizador descarregar pdf (Página 57)

Appendix A – Gateway Connection via RJ45 Cross-Over Ethernet Cable

1. Set up your computer temporarily with a xed IP address using the instructions given in Appendix B - Setting a

Fixed IP Address.

2. Connect the cross-over Ethernet cable between computer and RJ45 jack on the Gateway.

3. Congure the RF500A Gateway as in Gateway Commissioning. {Page 17}

4. Remove the cross-over Ethernet cable after the Gateway has reset. (See Gateway Reset {Page 11})

5. Using Appendix B - Setting a Fixed IP Address as a guide, restore the computer network settings back to as

existed previously.

6. Connect both the PC and RF500 Gateway to the LAN using regular Ethernet patch leads.

7. Verify that a connection can be made to the Gateway by following the steps in “Viewing the Gateway Login

Page” {Page 19} but using the newly congured IP Address instead of 192.168.25.220.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 65 66

Sem comentários

Comark RF500A Manual do Utilizador Página 57